RB420B Onye na-eme igbe siri ike
| RB420B Onye na-eme igbe siri ike | |||
| 1 | Nha akwụkwọ (A×B) | Amin | 100mm |
| Amax | 580mm | ||
| Bmin | 200mm | ||
| Bmax | 800mm | ||
| 2 | Mpempe akwụkwọ | 100-200g / m2 | |
| 3 | Ọkpụrụkpụ kaadiboodu (T) | 0.8-3 mm | |
| 4 | Nha ngwaahịa(igbe) emechara(L×W×H) | L×W Min | 100 × 50mm |
| L×W Max | 420×320mm | ||
| H Min. | 12 | ||
| H Max. | 120mm | ||
| 5 | Nha akwụkwọ mpịaji (R) | Rmin | 10mm |
| Rmax | 35mm | ||
| 6 | Nkenkenke | ± 0.50mm | |
| 7 | Ọsọ mmepụta | ≦28 mpempe akwụkwọ/min | |
| 8 | Ike moto | 8kw/380v 3 nkeji | |
| 9 | Ike ikpo ọkụ | 6kw | |
| 10 | Nbunye ikuku | 10L/min 0.6Mpa | |
| 11 | Ibu igwe | 2900kg | |
| 12 | Akụkụ igwe | L7000×W4100×H2500mm | |
1. A na-edobe oke max na obere igbe ndị dị na akwụkwọ ahụ na àgwà nke akwụkwọ ahụ.
2. Ike mmepụta bụ igbe 28 kwa nkeji. Ma ọsọ nke igwe na-adabere na nha igbe.
3. Anyị anaghị enye ikuku compressor.
Mmekọrịta kwekọrọ na paramita:
W+2H-4T≤C(Max) L+2H-4T≤D(Max)
A(Min)≤W+2H+2T+2R≤A(Max) B(Min)≤L+2H+2T+2R≤B(Max)
1. Onye na-enye nri na igwe a na-anabata usoro nri azụ azụ, nke a na-achịkwa pneumatically, na nhazi ya dị mfe na ezi uche.
2. A na-edozi obosara n'etiti stacker na tebụl nri na etiti. Arụ ọrụ dị nnọọ mfe na-enweghị ndidi.
3. New e mere ọla kọpa scraper na-arụkọ ọrụ na rola ọzọ compactly, n'ụzọ dị irè na-ezere akwụkwọ winding. Na scraper ọla kọpa na-adịgide adịgide.
4. Nabata ultrasonic mpempe akwụkwọ abụọ na-ebubata, na-egosipụta ọrụ dị mfe, nke nwere ike ime ka mpempe akwụkwọ abụọ ghara ịbanye n'ime igwe n'otu oge.
5. Mgbasa akpaaka, ngwakọta na usoro gluing maka gluu na-ekpo ọkụ. (Ngwaọrụ nhọrọ: gluu viscosity mita)
6. Na-ekpo ọkụ-agbaze akwụkwọ teepu akpaka ibufe, ịkpụ, na imecha pasting n'ime igbe quad stayer (anọ n'akụkụ) nke kaadiboodu na otu usoro.
7. Onye na-ekpo ọkụ na-ekpo ọkụ n'okpuru eriri ebufe nwere ike ime ka akwụkwọ ahụ ghara ịgbagha.
8. Igbe dị n'ime akwụkwọ na kaadiboodu na-arụ ọrụ na-edozi hydraulic iji hụ nke ọma.
9. Ihe mkpuchi ahụ nwere ike mgbe niile kechie, gbadaa ntị na akụkụ akwụkwọ ma mepụta n'otu usoro.
10. Igwe dum na-arụ ọrụ PLC, photoelectric tracking system na HMI na-emepụta igbe na-akpaghị aka n'otu usoro.
11. Ọ nwere ike ịchọpụta nsogbu na mkpu ozugbo.
